Took me about four hours this evening, even with having to glue the vent back together. Overall, this was a fairly easy project, and adds nice functionality to the car. You have to pull pretty hard to get the A-pillar trim off, to the point where it feels like it will break. What look like the top catches are not! Those things hold the vent together!ģ. A couple of plastic putty knives inserted into the bottom are your friend here. This will show you exactly what you need to remove to run the microphone cable up to the overhead console. Download a copy of the install instructions for the factory Bluetooth kit from here: Part number is: 32026144. The cable with the ipod plug, USB input and 3.5MM jack was routed through the back of the storage tray under the climate control panel. When using the Parrot, the remote controls everything, the stereo is along for the ride, so it needs to be easily reachable. ![]() I haven't settled on the final location for the remote, but am leaning towards between the ignition key and gearstick. I mounted the display over the Passenger airbag on/off light panel. The MKi9200 has a nice 2.5" display, and a wireless controller. The only seperate connection is switched +12V. It then plugs inline with the factory stereo wiring. It is almost completely plug and play, replacing the harness that comes with the Parrot kit. This handles getting the stereo sound in and muting the stereo. To connect it up to the stereo, I used a Quick Connect Products interface module for GM radios. This also has a USB input and iPod control. I started with a Parrot MKi9200 Bluetooth kit. XM and Onstar are still present and accounted for, and it all works quite nicely. ![]() With a lot of searching on this board, a few hours time and some money, I now have Bluetooth, USB MP3 capability, and iPod control in my '08 Sportcombi.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |